Solar Roman Shades

Enter the dimensions for your custom design in inches.

Inside Mount shades are contained within your window frame. You may prefer an Inside Mount as it provides a finished look without covering your molding; also allows more clearance to layer Drapery, or Valance over shades. Be sure to check your windows for "squareness", since Inside Mounted shades will not operate properly if windows are not "square."

Outside Mount shades are mounted on your wall or molding. Even if your windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides, since greater window coverage reduces light leak at shade edges. Please note that to accommodate the roller mechanism, your finished shade fabric will be 1-5/16" to 1-5/8" narrower than you specify on your order, causing a light gap with Inside Mount. If you require maximum light control and privacy, we recommend Outside Mount.

Side Mount is useful when shades cannot be mounted to the top of the window frame.

Loop Control provides a loop mechanism for smooth operation. The Cassette System features the easy operation of the Loop Control, plus a headrail covering the roller and mechanism. Note: Hems with accent rods not available with Spring Lock.

Motorization The effortless way to raise and lower shades. Choose multi-channel remote to operate up to 4 shades.

Specify Left or Right for Standard Cord or Loop Control lift system.

Cordless, Cordless Top Down/Bottom Up, and Motorization lift systems will have an easy shade control with push/pull of bottom rail. No lift cords, but shade has visible inner support cords across width. The slow rise system provides a controlled, smooth raise free of cords. Shade stays in place where released.

Used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Clear obstructions such as molding, window cranks, door handles, etc.

Your shades will have a standard clearance of approximately 1/2" from the mounting surface. Extension Brackets project your shades further away - 1 1/2" in total - from the mounting surface, allowing them to clear obstacles such as door handles, window operating cranks and molding. Extension Brackets may only be used for Outside Mount, and may not be combined with Loop Control upgrade.