Our special collection of Vintage finishes in 2" slat Wood Blinds expand your design possibilities with the latest trend in home decorating. These exclusive finishes are applied by hand to create a rich, weathered patina that accentuates the blinds' natural wood grain. Custom sizes from 9" to 102" wide, and 12'' to 120" high.
2-on-1 Headrail: Control light independently on side-by-side windows with this upgrade. Raise and lower each blind one at a time. Specify the Left and Right width for each side. Total width of the Left and Right blind must equal the overall width. Dimensions must be entered to the 1/8 of an inch. Minimum width is 36 inches.
Standard Ladder: Wood slats come standard with cording and route holes.
Ladder Tape (shown Left): Practical can be stylish! Add light control and a dash of style. Ladder Tapes cover route holes so sunlight won't poke through when blinds are closed. Cover route holes with Solid Twill or Decorative Ladder Tape for designer style.
Selected Ladder Style
All of our Wood Blinds come with a sleek standard wood valance. For enhanced style, and to complement other molding or trim in your room, consider one of our 6 exclusive and very affordable Valance Upgrades.
Our elegant Crown style Valance profile adds impact with distinctive angular, mitered corners. Crown style requires 2" additional wall clearance on each side. Available for outside mount only. Offered in Georgetown, Westchester and Rope designs; not available with Standard Valance.
Loop Control: Evenly raise, lower and position even large Wood Blinds with this handy continuous loop secured by a cord guide. Eliminates dangling lift cords for added safety and a sleek look. Blinds with Loop Control are not available with Side Mount. Minimum width is 25 inches, and maximum width is 84 inches.
Wand/Cord Tilt: Our Wood Blinds come standard with cord tilt (2 hanging cords). A wand tilt (shown at left) is available. Wand is approximately 1/2 the height of the blind. Wand tilt operates with a twisting motion. Wand tilt not available with Loop Control.
Inside Mount Return
Returns enhance the fine furniture look of inside-mounted Wood Blinds by covering the sides of the headrail that extend beyond the window frame.
Outside Mount Return
To determine the size needed, just subtract your frame depth from the blind headrail depth. Choose 1" for Standard or Cordless blinds; and 1-1/2" for blinds with Loop Control.
Cord Positions: Select Left or Right to raise and lower your blind.
Tilt Positions: Select Left or Right to rotate slats.
Blinds under 13" wide will be center tilt only, with no lift cord. Under 18-7⁄8" wide will have split controls on Left or Right. Cordless wood blinds will come with no lift cord.
|Left Blind Tilt|
|Left Blind Cord|
|Right Blind Tilt|
|Right Blind Cord|
Hold downs: Clips are mounted at the bottom of the window treatment. This option is great for securing your treatment on doors or in windy locations.
Extension Brackets: Used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Clear obstructions such as molding, window cranks, door handles, etc. Blinds over 72" in width will come with center support brackets.