|
|
1 3/8" Wood Blinds
1 3/8" slat Wood Blinds are our smallest size, perfectly proportioned for compact spaces such as entryway windows and French doors. This narrow slat size is uncommon in the marketplace, especially at this level of quality and with the complete array of enhancements smith+noble offers. Custom sizes from 9" to 102" wide, and 12'' to 120" high.
Unit Price $
SELECT PRODUCT DIMENSIONS
LEARN MORE
Enter the dimensions for your custom design in inches.
| Width (in.) |
| Height (in.) |
SELECT MOUNT TYPE
LEARN MORE
Inside Mount: mounted within the window frame. Small deductions will be taken to ensure proper fit.
Outside Mount: mounted on wall or molding surrounding the window.
TWO SHADES ON ONE HEADRAIL
LEARN MORE
2-on-1 Headrail: Control light independently on side-by-side windows with this upgrade. Raise and lower each blind one at a time. Specify the Left and Right width for each side. Total width of the Left and Right blind must equal the overall width. Dimensions must be entered to the 1/8 of an inch. Minimum width is 36 inches.
| Left Width |
| Right Width |
PRODUCT LABEL
| Room Type: |
| Window Description: |
| Next |
SELECT MATERIAL
Brilliant White 3347
|
Cherry 4483
|
Dark Cherry 3356
|
Dark Walnut 3383
|
Dove White 13427
|
Golden Oak 3357
|
Honey Oak 4484
|
Light Beech 3360
|
Navajo White 3344
|
Pale Ivory 3349
|
Soft White 3352
|
Selected Material
-
American Walnut 4485
American Walnut 4485
SELECT LADDER STYLE
LEARN MORE
Routeless Ladder (shown Left): An ingenious slat design that works without route holes, so even less light shows through when blinds are closed.
Standard Ladder: Wood slats come standard with cording and route holes.
Ladder Tape (shown Left): Practical can be stylish! Add light control and a dash of style. Ladder Tapes cover route holes so sunlight won't poke through when blinds are closed. Cover route holes with Solid Twill or Decorative Ladder Tape for designer style.
Standard Ladder
Tape Ladder
Tape Ladder
Routeless Ladder
Selected Ladder Style
|
SELECT VALANCE
LEARN MORE
All of our Wood Blinds come with a sleek standard wood valance. For enhanced style, and to complement other molding or trim in your room, consider one of our 6 exclusive and very affordable Valance Upgrades.
- Standard and Westchester Valance styles are 3" in height
- Georgetown Valance style is 3-1/2" in height
- Rope Valance style is 4" in height
Our elegant Crown style Valance profile adds impact with distinctive angular, mitered corners. Crown style requires 2" additional wall clearance on each side. Available for outside mount only. Offered in Georgetown, Westchester and Rope designs; not available with Standard Valance.
Standard Valance
Rope Valance
Westchester Valance
Georgetown Valance
Crown Rope Valance
Crown Westchester Valance
Crown Georgetown Valance
Selected Valance
|
| Previous | Next |
LIFT STYLE
LEARN MORE
Loop Control: Evenly raise, lower and position even large Wood Blinds with this handy continuous loop secured by a cord guide. Eliminates dangling lift cords for added safety and a sleek look. Blinds with Loop Control are not available with Side Mount. Minimum width is 25 inches, and maximum width is 84 inches.
Wand/Cord Tilt: Our Wood Blinds come standard with cord tilt (2 hanging cords). A wand tilt (shown at left) is available. Wand is approximately 1/2 the height of the blind. Wand tilt operates with a twisting motion. Wand tilt not available with Loop Control.
| Lift System |
| Tilt Style |
VALANCE RETURNS
LEARN MORE
Inside Mount Return
Returns enhance the fine furniture look of inside-mounted Wood Blinds by covering the sides of the headrail that extend beyond the window frame.
Outside Mount Return
To determine the size needed, just subtract your frame depth from the blind headrail depth. Choose 1" for Standard or Cordless blinds; and 1-1/2" for blinds with Loop Control.
| Clearance Depth |
| Return Depth |
SLAT CORNERS
LEARN MORE
Give your Wood Blinds the finished appearance of fine furniture with Rounded Corners. Especially effective with larger slat styles.
CONTROL POSITIONS
LEARN MORE
Cord Positions: Select Left or Right to raise and lower your blind.
Tilt Positions: Select Left or Right to rotate slats.
Blinds under 13" wide will be center tilt only, with no lift cord. Under 18-7⁄8" wide will have split controls on Left or Right. Cordless wood blinds will come with no lift cord.
| Tilt |
| Cord |
| Left Blind Tilt |
| Left Blind Cord |
| Right Blind Tilt |
| Right Blind Cord |
HOLD DOWN AND EXTENSION BRACKETS
LEARN MORE
Hold downs: Clips are mounted at the bottom of the window treatment. This option is great for securing your treatment on doors or in windy locations.
Extension Brackets: Used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Clear obstructions such as molding, window cranks, door handles, etc. Blinds over 72" in width will come with center support brackets.
| Hold Downs |
| Extension Brackets |
| Previous | Next |
Stay Connected with smith+noble
